Performance upgrade for 3-serie F30/F31 (330i)

Salgspris39.990 kr

MVA inkludert

Lagerbeholdning :
På lager

Product Information:

for 330i, 330i xDrive with engine B48B20O0
and 185 kW / 252 hp standard performance
not for cars with otto particle filter SA 01DE
performance: 221 kW / 300 hp
torque standard: 350Nm
torque AC Schnitzer: 420Nm
specifications only when using at least 98 octane fuel

Philosophy / Engineering

Engine tuning and performance upgrades have a long tradition at AC Schnitzer. To be on the safe side however, we prefer not to extract the maximum possible power but instead ensure greater robustness, which means a longer life of the engine.

Many of our performance upgrades are therefore designed for an increase in torque rather than an increase in horsepower. Because torque is what you feel when for example you're "pressed back in the seat" on pulling away.

The performance upgrade consists of a control unit for retrofitting into the vehicle. The control unit ensures that the data is processed depending on the speed and accelerator pedal position and the values for boost pressure, track pressure and air mass are passed on to the standard engine control unit. The parameters are slightly increased by the AC Schnitzer performance increase.

This results in a model-dependent power increase of up to 20% of the engine and increases the efficiency of the engine.

During development, it is checked in which speed range the highest torque increase is achieved. This is followed by a controlled reduction of the changed parameters for the high speed range >5000 rpm. This prevents the engine from overheating during long, fast journeys.

The standard protection parameters for the engine are retained with the AC Schnitzer performance upgrade.

In addition, the AC Schnitzer performance increase also has extensive additional parameters for protecting the engine and drive train, such as cold-start and overheating control.

Cold Start Control
The AC Schnitzer performance upgrades are only activated from approx. 1000 rpm and from an oil temperature of 80° C.

Overload / Overheating Control
From a water temperature of 115° C, the output is automatically regulated back to the series output.

Extensively tested
AC Schnitzer performance upgrades undergo extensive test series on race tracks, test benches and in daily traffic. These test series last up to 9 months and several 10,000 km.


Performance upgrade installed - what happens to the warranty?
For all AC Schnitzer performance upgrades, AC Schnitzer provides a warranty depending on your home country up to 5 years and up to 120,000 km mileage on the assemblies moved by the engine. For M models, this warranty ends at 80,000 km. The warranty is free of charge for our customers.

This gives you reassurance in the event of an incident. Here you can find the complete Warranty Conditions.

Homologation Certificate
The parts homologation certificate is an official document which allows the use of tuning parts in public road traffic within the framework of the (StVZO) German road traffic licensing regulations (and some other countries). After installation or conversion of the part described in the certificate, the vehicle must be presented to an official inspection body. The inspector determines the correct installation and the authenticity of the part and subsequently enters the modification in the vehicle documents. The official operating license of the vehicle thus remains in force. The parts homologation certificate is part of the scope of delivery.

Scope of delivery:
- control unit with software programming
- vehicle-specific wiring harness with original plug connection
- incl. assembly guarantee: 3 years in Germany - up to 5 years internationally
- warranty terms
- aluminium sticker for the engine compartment
- sticker "efficient performance"
- certificate “Performance Upgrade”
- certificate of authenticity
- homologation certificate

Uniqueness of the AC Schnitzer performance upgrade
- Additional control unit with programming
- "Plug & Play"
- Optimized motor efficiency
- more performance = improved agility
- Warranty: 3 years in Germany - up to 5 years internationally
Here you can find our complete Warranty Conditions.
- homologation certificates for almost all performance upgrades
- Increasing torque is more important than increasing horsepower
- No need for maximum power to ensure the stability and longevity of the engine
- extensively tested
- Increased driving pleasure

Kjøp nå - betal senere

Vilkårene for “Betal senere” gjelder når du kjøper varer, billetter eller tjenester, og velger å betale senere. 

Når du velger å betale senere, tilbyr vi deg å betale innen 14 dager fra forsendelsen av dine varer eller billetter, eller datoen for bestilte tjenester. Klarna Bank AB ("Klarna") vil overta betalingskravet fra butikken, men butikkens kjøpsvilkår vil fortsatt være gjeldende. Klarna vil sende deg betalingsinstruksjoner, slik at du kan betale direkte til Klarna. For kontaktopplysninger og mer informasjon, kan du gå til


Tuning installert - hva skjer med garantien?

For alle AC Schnitzer tuninger, gir AC Schnitzer en garanti avhengig av hjemlandet ditt opptil 5 år og opptil 120 000 km kjørelengde på aggregatene som beveges av motoren. For M-modeller slutter denne garantien på 80 000 km og 4 år. 

Til din informasjon:

Konvertering ved bruk av AC Schnitzer-komponenter påvirker ikke den grunnleggende garanti forpliktelsen til BMW AG i forhold til hele kjøretøyet. BMW-garantien kan bare ekskluderes i det spesielle tilfellet av et krav som direkte kan tilskrives en konvertering. BMW-kjøretøy oppgradert med AC Schnitzer-komponenter er derfor ikke automatisk ekskludert fra garantien. 


Betaling og sikkerhet


American Express Apple Pay Mastercard Visa

Betalingsinformasjonen din blir behandlet sikkert. Vi lagrer ikke kredittkortinformasjon og har heller ikke tilgang til kredittkortinformasjonen din.

TUV godkjenning

Kan hende du også liker